PRODUCT

W-1.6/8 three-phase

Widely used in: electric power, textile, military industry, electronics, automobile, water treatment, optics, chemical industry, PET bottle blowing, metallurgy, spraying, laboratory, biological fermentation, airflow crushing, nuclear energy, packaging, air separation, high-tech and other industries.

Classification:

Boutique machine

Tel

+86-13791501768

Quote

Introduction

Product parameters:

Product Brand	American Ba W-1.6/8 three-phase	Voltage	380V
Power	11KW 15HP	Exhaust volume	1.6m³/min
Exhaust pressure	0.8Mpa	Cylinder	φ100x3 (diameter x quantity)
Speed	880rpm	Gas tank volume	320L
Overall dimension	1700x640x1200 Lx WxHmm	Weight	430Kg

Product features:
Increase the wall thickness of the square type large volume box, internal pressure is small, the appearance of tall.
The cylinder adopts wear-resistant cast iron material, increases the wall thickness, multi-blade design, high wear resistance, small temperature deformation and good heat dissipation effect.
The use of ductile iron crankshaft, high fatigue strength, good vibration absorption, the crank tip after high-frequency crushing fire treatment, good wear resistance, minimal vibration.
The connecting rod is made of high-quality alloy with high strength and good stability. High folding stability, light weight and small inertial force.
The piston is made of high-strength cast aluminum alloy with sufficient strength and hardness.
Increase the protruding oil mirror to make it easier to observe the oil level.
Intelligent overload phase loss protector to avoid damage to the motor in case of voltage and missing items.
Closed protective cover to enhance safety protection.
Selection recommendations:
The air compressor displacement should be selected according to the air consumption required by your work equipment.
Single-stage air compressor pressure in the use of 0-0.7MPa or so, it produces more exhaust per KW, good efficiency. However, if it exceeds 0.8MPa, the displacement generated by the two-stage air compressor per KW is more, and the service pressure of the two-stage air compressor is about 0.8-1.25MP. Since the two-stage compression is the compressed air of the first-stage compression after certain cooling and then enters the second-stage cylinder for compression, the compression is relatively small, so the efficiency is higher than that of the single-stage compression. Therefore, it is recommended to use the two-stage air compressor.

Key words:

RPODUCTS