News

Best Practices for Rotary Screw Compressor Maintenance

Maintaining your rotary screw compressor is essential for protecting your investment, ensuring optimal performance, and preventing costly downtime.  Here are the key areas to focus on during maintenance to keep your compressor running efficiently:

2025-01-07

Familiar with the operation and use of screw air comperssor

The screw air comperssor needs to be placed in a flat and upwind position, especially in the mining area or construction site. The screw air comperssor should be placed in a place with less dust as much as possible, and the tire must be fixed to prevent movement.

2024-01-30

On the regular maintenance of piston machine

Due to the uneven reciprocating motion, it wears out quickly and needs to be replaced frequently. The cylinder needs to be removed and repaired within a month, and many sealing rings need to be replaced. There are dozens of parts such as cylinder liner springs that need to be replaced. Pistons, piston rings, valve valve parts, crankshaft bearings, etc. run continuously. Due to the large number of parts, especially vulnerable parts, the failure rate is very high, and several maintenance personnel are usually required.

2024-01-30

Maintenance screw air comperssor should pay attention to what content

Screw compressors rely on the continuous meshing of the rotor to output compressed gas. Therefore, the change of the spindle speed will affect the volume flow and exhaust pressure of the compressor. Therefore, the spindle speed is a major factor affecting the performance of the screw compressor.

2024-01-30

Troubleshooting of Piston Machines

Piston air compressor is reciprocating intermittent air supply, large airflow pulsation during operation, low degree of automation of piston air compressor, basically no automatic control system, the adjustment of output pressure is realized by the control of loading and unloading valve and regulating valve, the adjustment speed is slow, the fluctuation is large, the accuracy is low, and the output pressure is unstable.

2024-01-30

For the selection of screw air comperssor is very important

For most screw air compressors, the temperature of air or gas after compression in each section usually exceeds 170-180 degrees, but there are also piston compressors with higher thermal strength whose outlet temperature exceeds 220 degrees.

2024-01-30

How to choose a cost-effective piston machine

The piston machine is directional and must be installed with a phase sequence protector. In case the circuit phase sequence changes, it will protect it and not work. The spiral type is good, it has no direction, the wiring direction is not specified, and the work is stable.

2024-01-30

Analysis of piston machine is how to classify

The piston type is directional, and the phase sequence protector must be installed. In case the circuit phase sequence changes, it will protect it and not work. The spiral type is good, it has no direction, the wiring direction is not specified, and the work is stable.

2024-01-30

Briefly describe what types of piston machines

The displacement of the compressor should take into account the gas cycle, gas consumption, possible leakage of the pipeline, future expansion plan and other factors, generally should be about 20% more than the actual consumption. The main reasons for the high temperature can be divided into the following: oil filter blockage, temperature control valve spool jam, oil cooler internal or external is seriously polluted.

2024-01-30

Maintenance screw air comperssor to do what work

The product technology of the screw air comperssor is constantly upgrading, and many brands have transplanted the technological progress made in the centrifuge to the screw air comperssor, and achieved good results.

2024-01-30